Simple Method for Mirroring Byte Streams from RS232 to Ethernet

Posted on Thursday, July 3rd, 2008 by DJ Roberts at Galil
Posted in DMC Programming, Drives | No Comments »
If you have a device that talks serially to a Galil Serial port, this code will mirror the incoming byte stream to an outgoing Ethernet Handle. Lower baud rates may be necessary depending on the volume of data being transmitted. CI2,1;'configure communication ...
Read This Article »

Part Number of the 7407/7406 Amp Enable Chip (ICM-1900,ICM-2900,ICM-20100)

Posted on Wednesday, June 11th, 2008 by DJ Roberts at Galil
Posted in Drives, I/O Control, Motion Controllers | No Comments »
Below is the part number for the 7406/7407 chip if you need to change the polarity of your amp enable on select ICMs. Note, the desired configuration can be ordered directly from Galil at the time of ICM order. ...
Read This Article »