ICS-48100 100pin adapter for DMC-40×0

Posted on Tuesday, July 1st, 2008 by John Hayes at Galil
Posted in Motion Controllers | No Comments »
The ICS-48100 is a breakout module that plugs directly into the D-sub connectors of the DMC-40x0 and converts them into a 100pin Connector. This is especially useful for those that would like to upgrade to the DMC-40x0 series from a ...
Read This Article »

Part Number of the 7407/7406 Amp Enable Chip (ICM-1900,ICM-2900,ICM-20100)

Posted on Wednesday, June 11th, 2008 by DJ Roberts at Galil
Posted in Drives, I/O Control, Motion Controllers | No Comments »
Below is the part number for the 7406/7407 chip if you need to change the polarity of your amp enable on select ICMs. Note, the desired configuration can be ordered directly from Galil at the time of ICM order. ...
Read This Article »